JohnstoneSupply.com 71 DEFINITE PURPOSE MOTORS OEM Special Replacement Motors Carrier Direct Replacement Condenser Fan Motors • Three-Phase, 56 Frame • All-angle mount • Class B insulation, 70°C ambient • Automatic reset overload • Double sealed ball bearings • Quick connect voltage change • Shaft with both keyway and flat • Rotation: reversible • S89-387 replaces HD52AK652 • S81-938 replaces HD60FK651 • S89-901 replaces HD60FK652 Fig. Order # Mfg. # HP NEMA Frame Volts RPM F/L Amps Efficiency Std. Mount. Pos. Shaft Diam. Shaft Length “A” Dim. Wt. Lbs. Each A S89-387 H978V1 SPL 56Z 208-230/460-575 1140 5.5 78% W-8 5/8" 3-1/2" 11-1/2" 43.8 2699.00 B S81-938 H980L 3 56Y 208-230/460 1725 3.6/1.8 82.5% Horizontal 7/8" 2" — 45.0 3199.00 C S89-901 H979L 5 Y56Y 208-230/460 1725 15.0 82.3% Horizontal 7/8" 2-5/16" 13-5/8" 52.6 3999.00 Coleman Direct Replacement Draft Booster Motor • Shaded pole direct replacement for Coleman draft booster motors #8865-3149, used for units #8645A, D; 8655 A, D; 8665; 8665A; 8845A; 8855A; and 8865A • Special drilled and tapped holes for mounting • Centrifugal safety switch mounted on motor rated at 24V pilot duty Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. “A” Dim. Bearing Type Wt. Lbs. Each S88-386 D408 3-3/8" 1/150 115 3000 1 0.48 35% 1/4" 1-1/2" CWSE 5-1/2" Slv 3.5 415.00 Coleman Direct Replacement Air Booster • Direct replacement for 373-19801-820 and 373-19801-821 Order # Mfg. # HP Volts RPM F/L Amps Rot. Bearing Type Replaces Each X82-625 65475 1/150 115 3315 0.4 CCWSE Ball 373-19807-820, 373-19801-821 165.00 Coleman/Frigidaire/McQuay/Trane Direct Replacement Motor • This ball bearing shaded pole motor can be used as a direct replacement on Coleman, Frigidaire, McQuay, Tjernlund, Trane, etc., ice machines • Thermally protected • Two studs on 2.84" centers, 1/2" long, #8-32 thread • Shaft: #416 stainless, 4-1/2" long flat • Leads: 12" long • O.D. with cooling band, 4" • Rotation: CWSE Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. “A” Dim. Bearing Type Wt. Lbs. Replaces Each S59-471 D091 3-3/8" 1/15 115/230 3000 1 2.00/1.00 35% 5/16" 5"" CWSE 4-1/2" Ball 5.0 91 505.00 A B C
RkJQdWJsaXNoZXIy MjE0NjA2OA==