JohnstoneSupply.com 61 DEFINITE PURPOSE MOTORS Bath Vent & Range Hood Motors Fasco Fan and Heater Motors • S58-558 is designed as a replacement for Fasco 115V motors used in range hoods and bath vents • S58-559 is a 230V Fasco wall heater motor • Both are shaded pole, two pole, singlespeed with large oil reserves and heavy-duty bearings to provide extended life without relubrication Order # Mfg. # HP Stack Height Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. Bearing Type Wt. Lbs. Each S58-558 K100 1/100 5/8" 115 2750 1 0.73 28% 40/221" 1-1/8" CWSE Slv 1.5 165.00 S58-559 K101 1/150 1-1/4" 230 1260 1 0.52 28% 3/16" 1-5/16" CCWSE Slv 2.1 255.00 Unit Bearing Agitator Motors For Ice Machines and Beverage Dispensers • Direct replacements for ice machines and beverage dispensers manufactured by Cornelius, Scotsman, Reed, Vendo, Alco, Booth, Rowe and others • S58-537 and S58-538 have threaded shafts 1/4"-20 by 1/2" long at shaft end • S58-539 has two pin holes #52 approximately 3-1/2" apart • S58-662 shaft has 3/4" flat • S58-540 has one pin hole 0.095" diameter 3/8" from end of shaft • Stainless steel shafts match originals • Each motor comes packed with 11 #8-36 screws for mounting • Overload protected • Cast iron body Order # Mfg. # Diam. Watts Volts RPM Speeds F/L Amps Shaft Diam. Shaft Length Rot. Each S58-537 ESP-L15EMJR1 3-25/32" 15 115 1500 1 0.60 5/16" 5" CCWSE 299.00 S58-538 ESP-L15EMJR1B1 3-25/32" 15 115 1500 1 0.60 5/16" 7" CCWLE 329.00 S58-539 ESP-L15EMJ1B4 3-25/32" 15 115 1500 1 0.60 5/16" 9" CWSE 309.00 S58-662 ESP-OL15EMJR11 3-25/32" 15 115 1500 1 0.60 5/16" 7" CCWSE 305.00 S58-540 ESP-L25MJR1B1 3-25/32" 25 115 1500 1 1.10 5/16" 7" CCWSE 305.00 Carbonator Pump Motors Split-Phase Applications: • Carbonator pumps, direct drive gear and vane-type pumps, utility pumps Features: • Continuous duty, 40°C ambient • Automatic reset thermal protector • 5/8" quiet all-angle bearings • Open dripproof enclosure • Thrust bearing carries up to 25 lbs. end thrust Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Rot. Bearing Type Wt. Lbs. Each S88-821 5KH32DN5587X 5-5/8" 1/4 115 1725 1 5.00 CCW Slv 12.0 475.00 S88-842 5KH32GNB811X 5-5/8" 1/3 100-120/200-240 1725 1 5.60 Rev. Ball 14.0 569.00 S88-822 5KH32FN5586X 5-5/8" 1/3 115 1725 1 5.60 Rev. Slv 12.0 455.00 Carbonator Pump Motors Close Coupled Resilient Mount Applications: • Designed for use on carbonator and liquid transfer pumps • Used for under-the-counter beverage dispensing equipment Features: • Specially designed end shield with extended hub and short slotted 5/8" diameter shaft, which enables close coupled pump to be mounted directly to motor • Split-phase, automatic overload protection, sleeve bearing, reversible, 3" shaft height • Base mounting holes 4-1/4" x 2-3/4", 48Y frame Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. Bearing Type Wt. Lbs. Each S88-064 1004 5-5/8" 1/4 115 1725 1 4.60 57% 5/8" 1/2" Rev. SAB 15.0 625.00 S88-619 6001 5-5/8" 1/4 115/230 1725 1 4.40 56% 5/8" 1/2" Rev. SAB 16.0 865.00 S88-092 1003 5-5/8" 1/3 115 1725 1 6.00 54% 5/8" 1/2" Rev. SAB 16.0 685.00 S88-620 6079 5-5/8" 1/3 115/230 1725 1 6.20 65% 5/8" 1/2" Rev. SAB 16.0 1045.00 S88-621 6078 5-5/8" 1/2 115/230 1725 1 7.50 68% 5/8" 1/2" Rev. SAB 17.0 1245.00
RkJQdWJsaXNoZXIy MjE0NjA2OA==