JohnstoneSupply.com 39 DIRECT DRIVE MOTORS 48 Frame ECM Motors Helpful Motor Connection Hints 1. Green is always the ground wire 1. Never connect line voltage to two-speed leads 1. Motor should be installed so leads are in the 6 o‘clock position, or looped so water cannot enter motor Condenser Fan Motors with Aegis Shaft Grounding Included • 3-phase commercial 56 frame condenser fan motors for use with any VFD • Shaft grounding already mounted and included • 70°C ambient • Enclosed shaft end bracket, vented frame • Continuous duty, air over • Automatic reset thermal protector • Nameplated 60/50 Hz • Double sealed ball bearings Order # Mfg. # HP NEMA Frame Volts RPM F/L Amps Efficiency Std. Mount. Pos. Shaft Diam. Shaft Length “A” Dim. For Use With Wt. Lbs. Each No Base, 1140RPM S82-995 056T11O15570 1-1/2 56Y 200-230/460 1140 5.5-5.4/2.7 79% All Angle 5/8" 5" 16.1" VFD 35.0 1399.00 No Base, 850 RPM S83-001 056T8O15532 1 56Y 208-230/460 850 5.3-5.3/2.65 75% All Angle 5/8" 5" 17" VFD 46.0 1645.00 JuggerNaut Condenser Fan Motors with Bearing Current Protection (BCP) Three-Phase, 56 Frame, Open Air Over • JuggerNaut Pro with Bearing Current Protection (BCP) or standard Juggernaut models available Features: • 70°C (158°F) ambient temperature • Enclosed shaft end bracket with vented frame • Automatic reset thermal protector • External shaft slinger • A threaded lead exit • Voltage Change Device™ (VCD) to quickly change voltage on the spot • Double-sealed ball bearings • For commercial and residential fan/heat pump applications and may be installed outdoors Note: F/L Amps shown in chart is based on a rating of 60 Hz and 208V. Order # Mfg. # HP NEMA Frame Volts RPM F/L Amps Efficiency Std. Mount. Pos. Shaft Diam. Shaft Length “A” Dim. For Use With Wt. Lbs. Each Juggernaut PRO S83-385 H1053RB-PRO 1 56HZ 460/208-230 850 5.1-5.4/2.7 70.2% All Angle 5/8" 6" 11" — 44.2 2299.00 S83-379 H1053A-PRO 1 56HZ 460/208-230 850 5.1-5.4/2.7 70.2% All Angle 5/8" 6" 11" — 44.2 2299.00 S83-381 H1054A-PRO 1-1/2 56HZ 460/208-230 850 6.6-6.6/3.3 72.0% All Angle 5/8" 6" 12.4" — 49.1 2399.00 S83-377 H1055A-PRO 1/2 56Z 460/200-230 1140 2.4-2.7/1.35 75.0% All Angle 5/8" 6" 9.5" — 26.0 1499.00 S83-378 H1056A-PRO 3/4 56HZ 460/200-230 1140 3.2-3.2/1.6 74.0% All Angle 5/8" 6" 9.96" — 28.0 1645.00 S83-380 H1050A-PRO 1 56HZ 460/208-230 1140 3.8-4.0/2.0 72.0% All Angle 5/8" 6" 10" — 32.2 1699.00 S83-382 H1051A-PRO 1-1/2 56HZ 460/208-230 1140 5.6-6/3 77.0% All Angle 5/8" 6" — — 41.0 1845.00 Juggernaut S81-839 H1053RBV1 1 56 460/208-230 850 2.6/5.2-5.0 77.90% All Angle 5/8" 6" 12-1/3" Variable Frequency Drive 44.0 1599.00 S81-836 H1055AV1 1/2 56 460/200-230 1140 1.3/2.8-2.6 77.30% All Angle 5/8" 6" 10" Variable Frequency Drive 26.0 1045.00 S81-837 H1056AV1 3/4 56 460/200-230 1140 1.5/2.8-3.0 77.50% All Angle 5/8" 6" 10-1/4" Variable Frequency Drive 28.0 1145.00 Vertical Condenser Fan Motors Three-Phase, 56 Frame, Totally Enclosed Air Over Applications: • Used on many Carrier, York and McQuay rooftop units Features: • Automatic thermal protection • Class B insulation • 70°C ambient • Double sealed ball bearings • Shaft with both keyway and flat • Rotation: reversible Order # Mfg. # HP NEMA Frame Volts RPM F/L Amps Efficiency Std. Mount. Pos. Shaft Diam. Shaft Length “A” Dim. Wt. Lbs. Each S89-384 H696V1 1 56 460/208-230 1140 3.7 78.00% F-1 5/8" 4-7/8" 11-1/4" 34.4 1745.00 S83-643 H698V1 2 56 460/208-230 1140 6.8 78.00% F-1 5/8" 3-1/2" 12-3/8" 44.0 1399.00
RkJQdWJsaXNoZXIy MjE0NjA2OA==