36 ©2026 Johnstone Supply, LLC CONDENSER FAN MOTORS 48 Frame Permanent Split Capacitor Condenser Fan/Heat Pump Motors PSC, 48Y Frame, Open Air Over Applications: • For horizontal or vertical shaft up mounting in heat pump applications, central air conditioning outdoor condenser fans where motor is located directly in the air stream Features: • Automatic thermal protection • Water slinger on shaft end • End bell on shaft end is totally enclosed with water slinger on shaft, end bell opposite shaft end is open • Continuous duty, designed for frame band mounting or with four #8-32 thru-bolts extended -1/2” • Frame drilled and tapped with two 11/64” diameter holes for capacitor mounting when required • Shaft 6” long with two flats 90° apart • Electrically reversible rotation Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Shaft Diam. Shaft Length Rot. “A” Dim. “R” Dim. Bearing Type Wt. Lbs. Capacitor To Match Each S88-423 048A17O2006 5-5/8" 1/4 208-230 1625 1 1.80 1/2" 6" Rev. 4-1/2" 4-13/16" Ball 12.0 G21-930 479.00 S88-357 048A11O840 5-5/8" 1/2 208-230 1075 2 4.20 1/2" 6" Rev. 5-1/2" 6-1/16" Ball 19.0 G21-891 575.00 S87-992 048A11O678 5-5/8" 3/4 208-230 1075 2 5.10 1/2" 6" Rev. 5-1/2" 6-1/16" Ball 18.0 G21-897 735.00 Direct Drive Condenser Fan Motors PSC, 48Y Frame, Totally Enclosed Air Over Applications: • Direct drive condenser fans for all angle mounting. Needs to be mounted in the airflow of the fan for proper cooling. Features: • Automatic thermal protection • Condensate drain holes • Rotation: reversible with use of quick connectors • Slinger on shaft • High breakdown torque • High temperature thermal protector reduces nuisance tripping Note: Drain holes with removable plugs are located in each end bracket. Remove the plug on the bottom when the motor is installed. Leads: 36"; shaft: two flats, 90° apart; studs: four, 1-1/2" long on 5.12" bolt circle, #8-32 thread. Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Shaft Diam. Shaft Length Rot. “A” Dim. Bearing Type Wt. Lbs. Capacitor To Match Each S88-157 048A11T569 5-5/8" 1/4 208-230 1075 1 1.40 1/2" 6" Rev. 4-7/16" Ball 13.0 G21-930 349.00 S88-529 048A17T87 5-5/8" 1/4 208-230 1625 1 2.00 1/2" 6" Rev. 4-7/16" Ball 12.0 G21-930 465.00 S88-530 048A17T86 5-5/8" 1/3 208-230 1625 1 2.00 1/2" 6" Rev. 4-15/16" Ball 14.0 G21-930 509.00 S88-159 048A11T571 5-5/8" 1/2 208-230 1075 1 2.70 1/2" 6" Rev. 5-7/16" Ball 17.0 G21-891 399.00 S88-557 048A17T96 5-5/8" 1/2 208-230 1625 1 2.90 1/2" 6" Rev. 5-1/4" Ball 17.0 G21-930 545.00 Deluxe Heatmaster Condenser Fan Motors PSC, 48 Frame, Open Air Over Features: • Patented canopy design • Fan blades move cooling air through the motor for extra performance and long life • Electrically reversible • 70°C ambient • Heavy-duty ball bearings • All 5/8" diameter shafts have flat and key • All models, except S88-407, are suitable for use with solid state speed control devices Note: S88-219 and S88-407 are supplied with conversion kit allows their use in 56 frame wire belly band basket Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. “A” Dim. Bearing Type Wt. Lbs. Capacitor To Match Each S88-215 FC1046F 5-5/8" 2/5 200-230/460 1075 1 3.20 65% 1/2" 3-1/2" Rev. 8-13/32" Ball 15.4 G21-930 775.00 S88-216 FC1066F 5-5/8" 3/5 200-230/460 1075 1 4.00 65% 1/2" 3-1/2" Rev. 7" Ball 17.8 G21-933 955.00 S88-217 FC1086F 5-5/8" 4/5 200-230/460 1075 1 4.60 65% 1/2" 3-1/2" Rev. 11-29/32" Ball 31.0 G21-909 1299.00 S88-218 FC1086AF 5-5/8" 4/5 200-230/460 1075 1 4.60 65% 5/8" 3-1/2" Rev. 11-29/32" Ball 26.2 G21-909 1199.00 S88-219 FC1106F 5-5/8" 1 200-230/460 1075 1 6.40 65% 5/8" 4" Rev. 12-21/32" Ball 31.6 G21-913 1499.00 S88-407 FC1156F 5-5/8" 1-1/2 200-230/460 1075 1 7.00 65% 5/8" 4" Rev. 13-3/32" Ball 31.0 G21-913 1699.00
RkJQdWJsaXNoZXIy MjE0NjA2OA==