34 ©2026 Johnstone Supply, LLC CONDENSER FAN MOTORS 48 Frame Permanent Split Capacitor Condenser, Heat Pump, Refrigeration Condenser Fan Motors PSC, 48 Frame, Open Lead End Applications: • Horizontal or vertical shaft up applications Features: • Automatic thermal protection • Short body design • Electrically reversible Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. “A” Dim. Bearing Type Wt. Lbs. Capacitor To Match Each S81-055 FS1024S 5-5/8" 1/4 208-230 1625 1 1.40 65% 1/2" 4.93" Rev. 4.0" Slv 11.0 G21-930 735.00 S82-398 FH1024 5-5/8" 1/4 460 1625 2 0.90 60% 1/2" 1-3/5" Rev. 5" Ball 15.8 G21-930 729.00 S81-054 665A 5-5/8" 1/3 208-230 1625 1 1.90 65% 1/2" 6.44" Rev. — Slv 13.0 G21-930 835.00 S82-399 FH1054 5-5/8" 1/2 460 1625 2 1.40 60% 1/2" 1-3/5" Rev. 5-1/3" Ball 22.5 G21-933 1099.00 S82-385 435A 5-5/8" 1/2 460 1075 1 1.70 60% 1/2" 6.00" Rev. 5-5/8" Ball 16.3 G21-933 635.00 S82-392 F1076A 5-5/8" 3/4 208-230 1075 2 3.50 60% 5/8" 4-1/4" Rev. 5-1/3" Ball 19.0 G21-897 815.00 S82-384 158A 5-5/8" 3/4 460 1075 1 2.10 60% 1/2" 6.00" Rev. 5-5/8" Ball 19.0 G21-892 689.00 S89-892 FH1076 5-5/8" 3/4 460 1075 2 2.20 65% 1/2" 6.44" Rev. — Ball 20.0 G21-897 1199.00 Condenser Fan Motors PSC, 48 Frame, Totally Enclosed Air Over Applications: • For use on central air conditioning systems and outdoor condensing units Features: • Automatic thermal protection • All-angle mount • Extended tie rods both ends • Flat end bells both ends • Four drilled and tapped holes in the shell (except for S89-583) Note: Capacitor not included Fig. Order # Mfg. # Diam. HP Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. “A” Dim. Bearing Type Wt. Lbs. Capacitor To Match Each A S89-430 D919 5-5/8" 1/8 208-230 1075 1 0.90 65% 1/2" 6" Rev. 3-3/4" Slv 8.2 G21-930 379.00 A S89-217 D917 5-5/8" 1/6 208-230 1075 1 1.00 65% 1/2" 6" Rev. 3-3/4" Slv 12.0 G21-930 365.00 A S89-429 D906 5-5/8" 1/5 208-230 1075 1 1.50 65% 1/2" 6" Rev. 4" Slv 12.0 G21-930 435.00 B S89-581 D7909 5-5/8" 1/4 208-230 1075 1 1.80 65% 1/2" 6-1/2" Rev. 4" Ball 12.3 G21-930 325.00 A S88-894 D909 5-5/8" 1/4 208-230 1075 1 1.80 65% 1/2" 6-1/2" Rev. 4" Slv 11.2 G21-930 355.00 A S88-895 D908 5-5/8" 1/3 208-230 1075 1 2.40 65% 1/2" 6-1/2" Rev. 4-1/2" Slv 13.4 G21-933 409.00 B S89-582 D7908 5-5/8" 1/3 208-230 1075 1 2.60 65% 1/2" 6-1/2" Rev. 4-1/2" Ball 14.1 G21-933 349.00 B S89-583 D7907 5-5/8" 1/2 208-230 1075 1 3.70 65% 1/2" 6-1/2" Rev. 5" Ball 17.2 G21-891 435.00 Tech Tip Don't forget to remove appropriate Condensation Drain Plug. Drain holes should be at lowest point in motor to permit proper condensate drainage. A B Hundreds of Thousands of OEM Solutions at Your Fingertips For all of your AC needs supporting you from installation and beyond
RkJQdWJsaXNoZXIy MjE0NjA2OA==