100 ©2026 Johnstone Supply, LLC DEFINITE PURPOSE MOTORS Refrigeration Evaporator Fan Motors Evaporator Fan Universal Motor Kit • Prefastened, multi-fit, break-off mounting brackets • Break-off motor shaft with adapters • Complete with all mounting accessories, hardware and easy-to-read illustrated instructions • Replaces Mars #90999 • Impedance protected • 2" break-off shaft Order # Mfg. # HP Volts RPM Speeds F/L Amps Rot. Each 3 Lot S58-528 SM999 1/200 120 3000 1 0.31 Rev. 40.99 32.49 Ball Bearing Evaporator Motor Kit • Heavy-duty construction — ideal for commercial evaporator fans • Mechanically reversible • Impedance protected • Includes a 5-1/2" fan blade, 1/4" and 5/16" shaft adapters, 3/16" hub adapter and all accessory mounting hardware Order # Mfg. # Stack Height Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. Bearing Type Wt. Lbs. Replaces Each S58-668 65686 5/8" 120 3000 1 0.41 30% 3/16" 1-1/4" CWSE Ball 2.5 Mars #90948 Gem #EM686 189.00 Four and Five-Blade Plastic Fan Blades • S58-459 special for Broan, Nutone and Air King bathroom ventilators • S58-602 special for Bohn #5101B Fig. Order # Size Rot. Blades Hub Bore Each A S58-484 5-1/2" CCW 4 3/16" 15.99 B S58-108 4" CW 5 1/8" 12.99 B S58-109 4" CCW 5 1/8" 15.49 B S58-106 4" CW 5 3/16" 12.99 B S58-107 4" CCW 5 3/16" 12.49 B S58-459 5" CW 5 3/16" 18.99 B S58-460 5" CCW 5 3/16" 16.49 B S58-602 5-9/16" CCW 5 3/16" 15.49 Unit Bearing Fan Motors Direct Replacement for GE 51 Frame, Shaded Pole, Totally Enclosed Used on Commercial and Domestic Refrigerators, Freezers, Refrigeration Display Cases, Unit Heaters and Exhaust Fans • These motors will fit existing brackets used by GE and Morrill • Designed for quiet, efficient fan duty operation • Permanently lubricated • Die-cast aluminum housing and end shield 2–9 watt • S58-948 and S88-225 to S88-228 are cast iron • All-angle mounting, mounted by three screws on lead end • All motors except 2 watt have rigid foot mounts • 24" leads with molded strain relief or 2 watt, 25" leads on 4–9 watt • Used with 7" to 10" hubless fan blades • All have threaded shaft with hub • Includes vibration dampener, hubwasher, speed nut and three mounting screws: 2 watt has four screws, 4 watt has three screws and 6–9 watt has five screws Order # Mfg. # Diam. Watts Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot. Bearing Type Wt. Lbs. Replaces Each 5 Lot S82-799 UB550 2-5/8" 2 115 1550 1 0.22 30% 1/4" 20 Threaded CWOSE Unit Bearing 2.0 S88-040 125.00 119.00 S82-800 UB554 2-5/8" 4 115 1450 1 0.29 30% 1/4" 20 Threaded CWOSE Unit Bearing 2.0 S88-042 135.00 129.00 S82-801 UB555 2-5/8" 4 115 1450 1 0.29 30% 1/4" 20 Threaded CCWOSE Unit Bearing 2.0 S88-043 135.00 129.00 S82-802 UB582 2-5/8" 5 115 1550 1 0.34 30% 1/4" 20 Threaded CWOSE Unit Bearing 2.3 S88-388 155.00 145.00 S82-803 UB583 2-5/8" 5 115 1550 1 0.34 30% 1/4" 20 Threaded CCWOSE Unit Bearing 2.5 S88-389 135.00 125.00 S82-804 UB558 2-5/8" 6 115 1550 1 0.36 30% 1/4" 20 Threaded CWOSE Unit Bearing 2.5 S88-044 155.00 145.00 S82-805 UB559 2-5/8" 6 115 1550 1 0.36 30% 1/4" 20 Threaded CCWOSE Unit Bearing 2.5 S88-045 155.00 145.00 S82-806 UB562 2-5/8" 9 115 1550 1 0.53 30% 1/4" 20 Threaded CWOSE Unit Bearing 2.5 S88-046 159.00 155.00 S82-807 UB563 2-5/8" 9 115 1550 1 0.53 30% 1/4" 20 Threaded CCWOSE Unit Bearing 2.5 S88-047 155.00 145.00 S82-808 UB564 2-5/8" 9 230 1550 1 0.27 30% 1/4" 20 Threaded CWOSE Unit Bearing 2.5 S88-048 155.00 145.00 S82-809 UB565 2-5/8" 9 230 1550 1 0.27 30% 1/4" 20 Threaded CCWOSE Unit Bearing 2.5 S88-049 155.00 149.00 S58-948 2108 3-3/5" 9 115 1550 1 0.60 30% 1/4 x 20THD 1/2" CWLE SAB 3.0 — 165.00 159.00 S88-225 2112 3-3/5" 16 115 1550 1 1.00 30% 1/4 x 20THD 1/2" CWLE SAB 4.5 — 249.00 235.00 S88-226 2111 3-3/5" 16 115 1550 1 1.00 30% 1/4 x 20THD 1/2" CWSE SAB 4.5 — 249.00 235.00 S88-227 2114 3-3/5" 16 230 1550 1 0.50 30% 1/4 x 20THD 1/2" CWLE SAB 4.5 — 355.00 335.00 S88-228 2113 3-3/5" 16 230 1550 1 0.50 30% 1/4 x 20THD 1/2" CCWLE SAB 4.5 — 355.00 335.00 A B
RkJQdWJsaXNoZXIy MjE0NjA2OA==